The misconfigured keyboard in Windows is a fairly frequent problem and you can fix it with these steps that we will tell you about.
Has it ever happened to you that you have turned on your computer and when you go to use the keyboard, you realize that it is not configured? If so, you should know that this is quite a common problem and that can be tedious. Also, although it is often due to a Windows language error, it can also be caused by other reasons.
We have prepared this post to tell you how to fix a misconfigured keyboard in Windows, as it can be due to software or hardware problems. In addition, as you must already know, no electronic part is exempt from failure and that is why, sometimes, there are keys that start to stop working, such as the shift key or even the entire numeric keypad.
In the next few lines, we will review some of the solutions that can you help me to correct this misconfiguration on the Windows keyboard, both at the software and hardware level.
So you can fix software problems that misconfigure the keyboard
Not only the physical components can present failures, but also the software and, what is the same, the operating system. Besides, Although Windows is a fairly mature system, it is not without bugs. and many of these can end up misconfiguring the keyboard. Therefore, we will tell you some ways to fix it.
To start, you should know that, on the Windows taskbar, you will find a lot of shortcuts and buttons that can be useful, such as the language button that is right next to the clock and volume icons.
Usually this icon has the initials of the language you are using your keyboard at that time. And if you click on it, then a list of all the languages you have installed will be displayed.
That is why, if you notice that, suddenly, your keyboard is not in spanishyou can quickly click on the language button and reselect your native language, which would correct this problem.
The ALT + Shift key combination
Very similar to the previous solution, another way to fix the problem that your keyboard has been misconfigured in Windows is by resorting to the ALT + Shift key combination, which is one of the best shortcuts you should learn from this operating system.
The shortcut in question allows you to switch between all the languages you have installed in Windows, so you can press this combination as many times as you need until the Spanish language is selected again. This is a variant solution of the previous one, in case you don’t see the button on the taskbar.
Access the language settings in Windows
If the above does not work or throws you some kind of error, then you must resort to the solution that may take more steps, because you have to access the Windows Settings and to the section of time and languages.
- The first thing is to access the Windows Settings.
- Then you enter the section time and languages.
- So, in the left column, you must enter Language.
- Now, you will see on the right side all the language settings and the preferred ones you have.
- You should know that the one that is in the first place is the one that you will have active on your keyboard at that moment.
- You will simply have to find the Spanish language and click on it to upload it to the first place and set it as default.
And as additional information, if not only the language has been deconfigured, but also the keyboard layoutDon’t worry, because in this same interface of Language You will be able to find, in the lower part, the distribution of this and you will be able to choose again the QWERTY.
So you can fix hardware problems that misconfigure the keyboard
If the above doesn’t work then the problem may not be due to a theme software, but hardware. Obviously, in this case, the first thing will always be to turn the computer off and on to see if it is corrected. If not, you can try the following actions.
Clean the keyboard from dust and dirt
The first thing, and extremely important, is that you clean the keyboard, since the dirt and dust may have accumulated on the keys or the internal components of this peripheral, causing the malfunction.
Therefore, it is recommended that you periodically clean the keyboard to remove all dust and dirt that may accumulate with use. Also, if your keyboard allows it, you can remove the keys to clean more thoroughly. This can solve, in most cases, these problems.
Check if it is a problem with Bluetooth
if you use a wireless keyboard that connects via Bluetooth, you can try disconnecting and re-pairing to see if that fixes this issue. To do this, you must follow these steps.
*Enter the Windows settings and then in Devices.*In this section, you must look for the part of Bluetooth and other devices.*Now, in this interface, you need to find the name of the keyboard and click on it, then on remove device.*When it has been removed, then you can re-pair it from scratch and maybe the problem will be fixed.