How to improve your computer’s WiFi signal

Wi-Fi networks make life much easier for us. But despite their strengths, they have some notable disadvantages that in your case are penalizing the user experience when browsing the Internet. The most pronounced has to do with the lack of coverage that translates into very low network performance. What can you do in those cases? One of the measures to be adopted is improve wifi signal on computer adapter. Windows 11 allows you to do it very easily.

If you need to increase the transmission power of your device’s Wi-Fi adapter to improve the signal, read on. Here we show you what they are All the steps to do it on the latest version of the Microsoft operating system. But that is not all. We also tell you some tips to increase wifi coverage at home or in the office and, in this way, get the most out of your network.

Improve the Wi-Fi signal step by step on your computer

In Windows 11 (and its previous versions) there is a little trick that will allow you to maximize the power of the wireless network adapter in your computer. To increase the Wi-Fi transmission power on your computer, in Windows 11 you have the following method:

1. Access the Control Panel. The best way to do this is by locating it with the Windows search engine.
2. Once inside, enter the section of Network and Internet.
3. then click Center network and sharing.
4. Click on the shortcut that you will see on the left side of the window with the name Change adapter settings.
5. All the network adapters that you have installed on your computer will appear before you. If it is a laptop, it is normal that there is only one wireless adapter. However, if you have installed an additional receiver, it will also appear here. You must follow the instructions described below on as many wireless network adapters as you have connected to your PC.
6. On the Wi-Fi network adapter, right click and select Properties.
7. In the pop-up window, click Set up.
8. Enter the tab Advanced Options.
9. Look at the list of options below Property and select Potency of transmission.
10. in the dropdown Worth choose Maximum.

Close all windows to confirm the change. At this time, the transmission power of your network adapter will be the strongest it can be. Regarding the hack mentioned in this guide, there are a few things we need to clear up.

• It is not a magic solution. In case that the coverage offered by your router is poor, it may be necessary to take other measures to increase the Wi-Fi signal on your computer. See the next section of this article for tips on this.
• Not all network adapters allow this value to be changed. Depending on the manufacturer, model and software version, the parameter indicated in this article might not be available.
• The higher the power, the higher the consumption. We acknowledge that we do not have exact data on the impact on autonomy when changing this value. However, the usual thing is that the higher the power of the adapter, the higher the consumption. In the event that your PC is a portable device, we advise you to be attentive to the consumption of your computer after setting the transmission power to the maximum.

Other tips to improve the Wi-Fi signal on your computer

What was mentioned in the previous section may have solved the signal problems you are having when connecting to your Wi-Fi network. But what happens when this is not enough? In that case, it is best that you take a look at these recommendations.

Place the router in a high place

You may not need to increase the strength of the Wi-Fi signal on your computer if you follow the tricks that we mention here

Even though you think place the router in a high place It has no impact on the coverage of your Wi-Fi network, the truth is that it can help you strengthen the signal emission. Most often, this device emits the waves downward. So if you are in a raised area, the signal will reach your devices more effectively. Additionally, it is a good measure for those who live in a house with two floors and want to have coverage on the upper floor.

Buy an external antenna if your router allows it

Some routers, especially the most advanced ones, allow you to connect an external antenna to extend the radius of the emitted signal. Of course, before launching to buy a new antenna, our advice is to check if your device really supports this extension. If so, buy the antenna and screw it into the special connector that you will see on the back of the router.

Install a mesh network

Mesh networks have become the preferred solution for many users to their Wi-Fi signal problems. To create a network with these characteristics, you need to acquire a series of repeaters that you have to install at strategic points in your home or office. The Mesh technology interconnects each and every one of the repeaters, generating an ideal virtual mesh to cover large spaces. If you have a large home and are experiencing coverage problems, don’t hesitate. Mesh nets are perfect for you.

Obviously, these are not the only tips we can give you to improve the signal and coverage of your Wi-Fi network. We recommend that you take a look at our complete guide to learn about all the ways you can boost your Wi-Fi signal at home.

Related topics: Technology

Share