What to do to make Wi-Fi go fast
if you see that wifi is slow and you should have more speed, something may be wrong with your connection. Typically this is because you are connecting too far from the router, but it can also be because you are using the wrong channel or band. In addition, there may also be some fault in the router itself.
One option you can consider to improve Wi-Fi speed is to install wireless repeaters. You can use amplifiers, PLC devices or Mesh systems. All of them will allow the connection to improve and you can have a more stable and faster connection to connect all kinds of devices.
These types of devices will help end dead zones. This is how a place in the home is known where the connection does not reach or is very limited. With this you will be able to connect with greater stability, although you will never have the same speed as if you connect right next to the router.
Use the correct band
Another very important point is choose the Wi-Fi band well which we are going to connect to. We can use both the 5 GHz and the 2.4 GHz. Each of them has its advantages and disadvantages, so choosing which one to use at all times is important to have a good connection.
In summary, we can say that the 5 GHz band is the best to have the maximum speed. However, it is the one that will suffer the most when we move away from the router. On the other hand, the 2.4 GHz band is less sensitive to distance and possible obstacles, but offers less Internet speed.
Keep the router in good condition
Of course, a fundamental factor is the router care. It is important that it is updated, that it has everything in good condition. In this way you will be able to take advantage of the improvements that may have been introduced, but also correct possible vulnerabilities that hackers can exploit.
In addition, keeping the router in good condition is also achieved by protecting the Wi-Fi network. This will keep out potential intruders who can slow down your connection and slow down your speed. Always use a good password and current encryption, such as WPA-2 or WPA-3, and prevent them from being able to enter without your permission.
Choose the channel well
One more factor to take into account is to choose the Wi-Fi channel well. Especially if you connect to the 2.4 GHz band, your neighbors may connect to the same or nearby channel and that causes interference that prevents you from navigating correctly through the network.
If you connect to a saturated channel you will have problems browsing, downloading files, playing streaming content, etc. Therefore, you must choose well which one you are going to connect to and thus solve possible problems.
In short, as you can see, it is possible to improve Wi-Fi speed simply if you take into account some of the advice we have given. The objective is to achieve a good connection, that there are no cuts and that it is fast.