There are many maintenance tasks that only a mechanic can perform and for which you will need to visit the workshop. But it is important to know how to divide and delve into those that you can take care of yourself, such as make the change of taillights and headlights in case it is necessary. But this is just a small example, since there are many other things that you can take care of as you will see below.
Check tire pressure
Inadequate tire pressure is not something that is recommended at any level. It can lead to accidents or other problems. The good news is that learn to measure tire pressure it’s nothing complicated. You will have to do it taking into account two things. The first is the levels at which the pressure in your vehicle has to be. It is important that you remember that each car has its own measurements, so be careful if you look for the information online. Instead, it is preferable that you locate that data inside the vehicle. The second aspect to take into account is that you need a pressure gauge. But don’t worry because they are really cheap. You can buy them on Amazon for less than 20 euros.
That being said, check the pressure regularly and if you notice something strange on the tiresTry to have an air compressor for your car among your tools. With one of these teams you will be able to get out of trouble in any type of situation and thus know that your tires will always be in the best condition.
Refill windshield washer fluid
More than one driver has stopped using their windshield washer fluid for a while because they ran out and waited until the shop visit to have it refilled. But actually, it’s something really basic that can be done without help. You need to buy the liquid and then look for the port where you have to place it. To do this, look at the manual of your vehicle, but it is located under the hood and does not usually have much loss. Some people pour the liquid directly from the bottle, but if you don’t feel capable, it is best to use a funnel.
Change taillights and headlights
No, you don’t have to take the car to the workshop for this. It is possible that you think that it is a component of volume and importance in your car, but you can take care of its change on your own. And since it is something tangible whose results you will see instantly with the new light you put on it, surely it is something that you love to change.
In most vehicles you do not have to complicate for the change. Find the correct angle to unscrew the original bulb and then put the new one you bought. Use Google with the intention of checking the bulbs your car model needs and take a look on YouTube for tutorials from people showing you how to make the change. It is not something complicated, but it is obvious that you need a little guidance. In any case, it will not be difficult for you to find it.
Check the oil level
A large part of drivers no longer have to worry about this problem, but there are still millions of people who they find the need to do it. If you want to optimize oil changes, it will be recommended that you do a little fixing if you encounter any kind of problem or leak. In that case, what you have to do is, first, confirm that you need a little extra oil.
To do this, locate the oil gauge, take it out and clean it well. When you have it ready, put it back in the oil tank. Remove it again and now you will have a real mark of the oil level that your vehicle has. From there you will only have to fill it in as you need it.
jump start the battery
This is one of the worst situations imaginable if you are not very confident in your vehicle maintenance skills. But the reality is very simple: when you have already started the battery for the first time, you will not worry again, because you will know that it is a basic process. You will, of course, need the connecting clips to be able to link the two vehicles. It is recommended that the cables of the clamps are long, since sometimes it is a bit annoying to have to keep moving the other car and it greatly reduces the spirits of the people involved.
After that you will have to make the connection. Put one of the red wires in each car and also one of the black ones. The black cable that you connect in the vehicle without a battery does not have to go to this, but to another space where you can put it. Now you have to start the car that has the battery activated. When a few minutes have passed, start the car that needs the help and the engine will start up. Then make the disconnection of the cables in the opposite order in which you put them and leave the car whose battery has turned back on for a few minutes. Then drive for 15-20 minutes and the battery will recharge.
What else to take into account?
the adventure of start maintaining your vehicle it is more than likely that you like it and that you want to know more every time. Although there are limitations, you can apply the ideas that we have given you so that you can gain confidence and take care of checking your car, especially if you have bought it second-hand. Also, do not forget the importance of having a tool kit for your vehicle and knowing the maximum information about your specific car model. That will help you avoid problems and know, at all times, that you are doing what is best for your vehicle. Also, don’t forget your car’s manual, which usually has a large volume of pages, but also hides a lot of what you need to know.