Problems with graphics cards are detected GeForce RTX 5080which forces to use the interface PCIE 4.0.
NVIDIA RTX 5080: Report problems with PCIE 5.0
The site Club386 a problem with the graphics card has been encountered RTX 5080 which causes black or white screens that prevent the correct starting the operating system.
«Today, a completely configured system of a respected systems integrator of the United Kingdom has reached the headquarters of Club386 equipped with an AMD Ryzen 7 9800x3D processor and a GeForce RTX 5080 graphics card. In the first start, the system behaves as it is I expected. In the second start, the same blank screen appears, which leads us to believe that the problem is potentially generalized ».
– Parm Mann, Club386
Problems with graphics cards had already been reported RTX 50 that were related to the use of the interface PCIE 5.0. As was the case on that occasion, configuring the system with an interface PCIE 4.0 corrected this problem.
Since these problems were reported for the first time by Overclocker Der8auerthere has been no official statement by Nvidia. The only solution to these failures would be to modify in the BIOS the use of PCIE 4.0 For the main PCI slots.
We recommend our guide on the best graphics cards on the market
The graphics cards that had been reported with these failures came from the manufacturers Manli and Colorful, although in the tests of Club386 The graphics cards were not one of these firms. Of both manufacturers, Manli is aware of at least one case of a graphics card that does not work, but Colorful did not provide an official statement, although he suggested that it could be a pre-launch controller problem.
Club386 He also points out that this could be a design problem. The graphics cards RTX 50 FOUNDERS EDITION They have separate PCB plates and one is exclusive to the PCIE slot, which could be the cause of the problem. We will keep you aware of all the news.
